Quick Answer: What Do You Do If Your Wii Sensor Bar Doesn’T Work?

What can I use instead of a Wii sensor bar?

To replace the sensor bar, simply light up a few candles near the TV, and bam – everything’s back to normal.

The reason why this works is because the Wii Remote relies on infrared lights to keep track of its position, and the candles’ flames emit them..

Will a Wii work without the sensor bar?

You don’t really need the sensor bar. It doesn’t transmit any data to your Wii console. That long, thin wire – it only plugs into Wii for power. And as it turns out, if you’re crafty and imaginative, you don’t even need it.

How long do Wii remotes last?

30 hoursA fresh set of alkaline batteries should last, depending on amount and type of use, up to 30 hours. This can vary greatly based on certain factors such as Wii Remote Speaker Volume, Rumble, battery quality and age, and the type of game being played.

Where is the best place to put the Wii sensor bar?

Mount the Sensor Bar to the front edge of the surface that the TV is sitting on. Do not place the Sensor Bar below the surface that the TV is sitting on (for example, on shelves below the TV). The front of the Sensor Bar should be aligned with the front of the surface that the TV is sitting on.

Do candles work as a Wii sensor bar?

If you wii sensor bar is broken, you can replace it with two candles. You just put two candles (it works with anything that emits infrared light) in front of your TV instead of the sensor, with 25 cm apart. The wiimote will recognize the two infrared light as if it were a sensor.

Does GameStop sell Wii sensor bar?

Nintendo Wii Sensor Bar (Assortment) | Nintendo Wii | GameStop. This website is AudioEye enabled and is being optimized for accessibility.

Can I use my iPhone as a Wii Remote?

A new suite of free iPhone games turns the handset into a controller, potentially creating competition for Nintendo’s Wii. … It’s pretty straightforward: Connect your iPhone to 3G or the same Wi-Fi network as your computer (the latter is preferred), register for an account, download the app and start whacking away.

How do you reset the Wii sensor bar?

Select “Wii Settings.” Select the right-pointing arrow on the right side of the screen, then select “Sensor Bar.” Select “Sensitivity,” then select “OK.” Select “OK” again when a dialog box appears on the screen.

How do I know if my Wii sensor bar is working?

Five infrared lights should appear on both sides of the Sensor Bar. While the position/angle of the camera may need to be adjusted slightly, the lights are fairly easy to see in the LCD display. If the lights are visible, the Sensor Bar is working.

Why are my Wii remotes not working?

Open the SD Card slot cover on the front of the Wii console and press and hold the red SYNC button for 15 seconds. This will clear all synced Wii Remotes from the console. Resync the Wii Remote by removing the battery cover and pressing the red ‘SYNC’ button. Then press the SYNC button on the Wii console.

How do I get my Wii remotes to work again?

Press and release the SYNC Button just below the batteries on the Wii Remote; the Player LED on the front of the Wii Remote will blink. While the lights are still blinking, quickly press and release the red SYNC Button on the Wii console. When the Player LED blinking stops and stays lit, the syncing is complete.

How do I get my wireless Wii sensor to work?

Mount the sensor bar at the top center or bottom center of your television or entertainment center. Most wireless sensor bars come with adhesive tape on the bottom; press the bar down firmly to keep it in place. Press the power button on the wireless sensor bar.

How do you calibrate the Wii sensor bar?

Complete these stepsAccess System Settings.Select the right arrow to proceed to page 2.Select Sensor Bar.Select Sensitivity.Aim the Wii Remote at the television.Use the + and – buttons on the Wii Remote to adjust sensitivity until only two blinking lights appear. … Press the A button when done.