Quick Answer: Why Is My CenturyLink Modem Blinking Red?

Make sure yours is updated and running smoothly.

Keep it up to date: Make sure your browser and web plug-ins (like Java, Adobe Flash and Silverlight) are updated.

You can use a third-party website to do a browser check.

Clear cache, cookies, and history, which can slow your browser down..

Locate the Reset Button. Look for the factory reset button on the back of your modem or router—it’s likely red. … Use the Reset Button. To initiate the factory reset, press and hold the button for at least 15 seconds. … Wait. Wait for at least 3-5 minutes for the factory reset to finish.

Why do modems need to be reset?

Why do you need to reboot your modem? … Rebooting your modem can fix Internet connection problems, improve slow moving connections and resolve wireless issues, which also affect your Digital TV service that is being transmitted over an internet connection.

Some modems require firmware, a blend of data and memory stored on your modem’s memory chip. Check CenturyLink to see if your firmware is old and needs an update. Check your cables. If the cable you’ve used to connect your modem to your phone jack is frayed or broken, your internet connection won’t work.

How can you tell if your modem is going bad?

Check the Diagnostics A great place to look for problems in your modem’s ability to function is on the diagnostics pages for that specific modem. If you’re not sure where this is, you can get to it by simply typing your IP address into the search bar.

To reboot your modem:Unplug the power cord from the back of the modem. Make sure you have unplugged the correct cord by checking that all the lights on the modem are OFF.Wait for 1 minute. Plug the power cord back into the modem.Wait for the power light and internet light to turn green.Try connecting to the internet.

One or more of these material issues could be interrupting your Wi-Fi connection: An out-of-date modem. Materials that are hard for Wi-Fi signals to pass through, like concrete, drywall, and hollow wood. Too much distance between the device you’re trying to connect and the router/modem.

Check the lights on your modem DSL light: green (solid) Internet (INT) light: green (flashing) Wireless light: green (flashing), if you have wireless capabilities. Ethernet light: green (flashing), if you are connected by an Ethernet cable.

What does blinking red light on modem mean?

modem failureA blinking red light indicates a possible modem failure. … Note: Most modems have a black button power on the back side. If your modem is connected to power, and yet no lights are lit, check to ensure the power switch on the back is toggled to the “on” position.

How do I fix a red blinking light on my spectrum router?

To reboot your modem and your WiFi router:Unplug the power cord from the back of the modem and remove any batteries.Unplug the power cord from the WiFi router.Wait 60 seconds, and then reinsert any batteries and reconnect power to the modem.Wait at least two minutes to allow the modem to power up.More items…

The internet light will BLINK RED and GREEN when it is auto-detecting the internet configuration. If this continues for more than a minute, you may need to contact technical support to have your internet translated. The internet light will be solid AMBER if the modem is in default mode and needs to be activated.

Why is the wan light red?

But if it’s off or red in color, then it’s time to check to make sure that the network cable that connects the router’s WAN (Internet) port (often on the back of the router) to the modem is plugged in securely and not broken in any way . If the cable is all fine, then it’s time to check your cable or DSL modem’s light.