Why TP Link Wireless Is Not Working?

With the router powered on, press and hold the RESET button on the back of the router for more than 10 seconds until the system LED starts to flash quickly.

Then release the button and wait for the router to reboot to its factory default settings..

How do I restart my WiFi?

To reboot your modem and your WiFi router:Unplug the power cord from the back of the modem and remove any batteries.Unplug the power cord from the WiFi router.Wait 60 seconds, and then reinsert any batteries and reconnect power to the modem.Wait at least two minutes to allow the modem to power up.More items…

Usually, TP-LINK powerline adapters have three LED lights: First one stands for power; Second one stands for powerline connection; Third one stands for Ethernet connection.

Why my WiFi is not working?

To identify router problems, connect other devices like your mobile phone to the WiFi and see if it works. … On the other hand, if the Internet doesn’t work on other devices too, then the problem is most likely with the router or the Internet connection itself. One good way to fix the router is to restart it.

Power on your router and computer first and then modem.Log into the router’s web-based management page. … Configure WAN Connection Type. … Enter your PPPoE username and password which are provided by your ISP.Click Save to save your settings, then the router will connect to Internet after a while.More items…•

How do I fix my WiFi connection?

Step 1: Check settings & restartMake sure Wi-Fi is on. Then turn it off and on again to reconnect. Learn how to connect to Wi-Fi networks.Make sure Airplane mode is off. Then turn it on and off again to reconnect. … Press your phone’s power button for a few seconds. Then, on your screen, tap Restart.

How do I fix my WiFi router?

If you’re having trouble with your wired internet connection, you can try restarting (power cycling) your modem:Unplug the modem.Turn off the router and computers and/or mobile devices.Plug in the modem. Wait two minutes.Turn on the router and wait two minutes.Turn on the computers and/or mobile devices.

TP-Link modems have lights on the front (8901G and 8950) or the top (8816, 8951, 8961 and 9970). Information is communicated by whether the lights are on, off or flashing. Activity on a line is often indicated by flickering lights, when the line is active.

TP-Link Tether provides the easiest way to manage routers or range extenders through your iOS or Android devices. With a unique, exclusive TP-Link ID, you have the power to manage your router anywhere and anytime, including checking the status of your networking device, who’s online and what their privileges are.

First, RE light of Range Extender is just used to indicate the WPS process. After you press Range Extender’s RE/WPS button, the RE light will start blinking. After several minutes, if RE light becomes solid on, it means WPS process is successful.

How to view System Log of TP-Link wireless Router?Open the web browser and in the address bar type in: http://192.168.1.1 or http://192.168.0.1 or http://tplinklogin.net.Then press Enter.Type the username and password in the login page. They are both admin by default.View System Log. Click System Tools->System Log.